Reviewerst Nailers Best‌ ‌Pin‌ ‌Nailer

If you are reading this, then you are already familiar with pin nailers. On the other hand, if you want to know more about the best pin nailer – you are welcome!

This device will help you fix everything you need in the blink of an eye without much physical effort and heaps of time. In general, these devices are best suited for more delicate work, finishes, and very thin plywood. If you are familiar with finishing, rest assured that 99% of this work was done with a pneumatic appliance. In addition, the article will cover both pneumatic and electrical devices so that each buyer can choose the right device for themselves.

Electric pin nailer vs pneumatic

In fact, both pneumatic and electric types of pin nailers are very different from each other and are most likely bought for different reasons, so I propose to consider their differences more specifically.

Firstly, raising the topic of the electric version, I want to immediately clarify that, unlike the pneumatic pin nailer, this one starts up very quickly, and you don’t have to wait long. Also, the working time in the electric nailer is slightly higher because, on a full charge, some tools can hammer about 1000 nails without recharging. However, a significant disadvantage is that electrical devices are much heavier, therefore, this directly affects your efficiency because, with constant work with a heavy device, you get tired more quickly. Also, speaking about the cons, it is worth noting the price, which is usually 2 times higher than the price of pneumatic versions of the pin nailer.

Secondly, when considering a pneumatic nailer, it has both its advantages and some disadvantages. For example, the operating time depends on the air compressor, which needs a certain amount of time to recharge. On the other hand, this will not be a big problem due to the fact that pneumatics is usually 2 times lighter than an electric tool, and, accordingly, you can work with it longer. A separate plus is a price: if, for example, an electric appliance costs $200, then a pneumatic nailer will cost you half the price, I would say up to $100.

‌Pin‌ ‌Nailers Comparison Table

Type Pin gauge GA Pins lenght Magazine capacity Weight, lbs
Makita XTP02Zbest electric electric 23 5/8, 11/16, 3/4, 1, 1-3/16,1-3/8 120 4.9 Review
Bostitch BTFP2350Kbest pneumatic pneumatic 23 5/8 – 2 135 2.5 Review
Grex P650L pneumatic 23 1/2 – 2 100 2.6 Review

Electric Pin Nailer Reviews

Makita XTP02Z – best electric

Makita XTP02Z

The Makita XTP02Z is ​​one of the best cordless pin nailers on the market. This electric pin nailer does its job well with good performance and thoughtful design solutions from the manufacturer. For example, it was a very good idea to insert an LED torch that perfectly illuminates the work surface. Also, another LED insert displays the battery status, so you can immediately calculate how much work you can do.

The device can please with a variety of pins that it uses: 5/8, 11/16, 3/4, 1, 1-3 / 16, and 1-3 / 8inches. This number of different sizes is more than enough to carry out any kind of work that depends on the XTP02Z. In addition, the magazine capacity is also very good – 120. Weighing 4.9 lbs, you can easily operate the device without getting tired of long-term work. In addition, I would like to clarify that the presence of the Anti-dry Fire mechanism will greatly help when working because it will help to avoid surface distortion and damage to it.

Key specs

  • Type: electric
  • Pin gauge: 23
  • Pins lenght: 5/8, 11/16, 3/4, 1, 1-3/16,1-3/8
  • Magazine capacity: 120
  • Weight: 4.9

Metabo HPT NP18DSAL

Metabo HPT NP18DSAL

The HPT NP18DSALM from the manufacturer Metabo is one of the most reliable and reliable electric pin-nailers. In fact, this device has something to brag about, so I propose to take a closer look.

All the benefits start even with the battery because the manufacturer made sure that your work time was reliable, and therefore equipped the device with a 3.0Ah lithium-ion battery with fast charging. In addition, the basic package features a contractor bag, goggles for work, and other nice things. The device also works with 23 pin gauges and supports 5/8, 3/4, 1, 1-3 / 16, and 1-3 / 8-inch nails.

I also want to point out that the NP18DSALM is capable of supporting up to 3000 nails per charge. As for me, this is more than enough for a large volume of work. Another big plus is the LED backlight, which will help you see the workspace perfectly in low-light conditions.

Key specs

  • Type: electric
  • Pin gauge: 23
  • Pins lenght: 5/8, 3/4, 1, 1-3/16,1-3/8
  • Magazine capacity: 120
  • Weight: 4.4

Pneumatic Pin Nailer Reviews

Bostitch BTFP2350K – best pneumatic

Bostitch BTFP2350K

Thanks to a certain observation and an elementary analysis of the characteristics and capabilities of the device, I think Bostitch BTFP2350K can be called the best 23 gauge pin nailer without exaggeration. Firstly, with the convenient and compact design, together with a good grip that is sealed with rubber, you will hardly feel tired from working with it.

This pneumatic tool does a great job with its incredibly large 135 unit magazine. This is enough for long-term operation while not recharging the device for a long time. There is also a nice bonus in the form of a reverse mechanism that will help to remove already installed nails. The manufacturer BTFP2350K has done maximum for your safety, therefore the tool works completely without oil, thus preventing streaks and unwanted contamination on the working surface.

Key specs

  • Type: pneumatic
  • Pin gauge: 23
  • Pins lenght: 1/2 – 2
  • Magazine capacity: 100
  • Operating pressure, PSI: 70 – 100
  • Weight: 2.6

Grex P650L

Grex P650L

The tools that Grex makes are not that popular in the market, but that doesn’t make them bad. In particular, the P650L model is a very good choice if you want to get a compact tool that will help out with the quality of work. For example, even the design: the Narrow nose of the device is made in such a way as to help you work in tight and hard-to-reach places without suffering from setbacks.

This pneumatic air pin nailer has 23 pins gauge and supports 1/2 – 2 inch pin lengths that can handle even thick and durable wood with ease. Unfortunately, the store of the device is not as large as the previous ones because it contains only 100 units. This is still a lot, so you can count on long-term operation without recharging without any problems. While it is a pneumatic tool, its operating pressure ranges from 60 to 110 psi.

Key specs

  • Type: pneumatic
  • Pin gauge: 23
  • Pins lenght: 1/2 – 2
  • Magazine capacity: 100
  • Operating pressure, PSI: 60 – 110
  • Weight: 2.6

Buyers guide

Things to сonsider when choosing the pin nailers

Supported pin length

When working with nailers, you should be aware that there is a huge range of different shapes and sizes of pin shapes on the market. The main feature of such pieces is the difference in length due to the fact that when working with different materials, you will need different lengths of consumables. In fact, some pin shapes are 3/8 “or 1/2” long, and some are even 1 “long. As a result of this variation, many nailers simply offer a pin shape size adjuster.

Minimum pressure rating

There are different types of nailers, but in this case, we are talking exclusively about pneumatic ones since only they are important for the value of operating pressure. It is compressed air that generates the force to drive nails into the surface you want.

When working, it is important to take into account that each nailer has a different operating pressure indicator, therefore, when working, you must always use the same device so that you do not have problems later.

Pin gauge

The diameter and other indicators of nails are very important when choosing a nailer. Typically 23 gauge is supported by most nailers, and you will have a hard time finding a tool that supports another and why?

This is due to the fact that caliber 23 is quite common and is ideal for all types of applications, regardless of the wood and its quality. Therefore, you must make sure that the nailer you are buying supports the 23 gauge pins so that you will be much more comfortable working with it.

Magazine capacity

Magazine capacity is just as important. Because of the number of nails, it can hold, the time of your work without recharging depends. Let’s say that magazine with a capacity of about 120 will be the best option and you will have enough for a relatively long time. It is also worth considering that some devices can automatically adjust their magazine to the caliber of the nails, which is more than convenient, in fact.