Inverters have become very popular for various purposes, and any motorist appreciates having this device in his car.
It helps a lot to expand the capabilities and connect a much larger number of different electronics and power it. If, when choosing an inverter, you have a very logical question about how to connect the inverter to a car battery, now we will analyze it in detail!
Where to install the inverter
First, let’s figure out exactly where it is worth installing an inverter in your car. The most common places are usually the trunk or a free space under the seat due to the fact that there is a place that is rarely used by anyone. There is also an option to install it in the glovebox provided that you do not use it.
The inverter installation process is a responsible business, so think carefully considering the convenient location and how the devices will be connected to them. For example, if you need all the necessary equipment in the cabin, it would be illogical to install an inverter in the car boot.
It is also vital to install the inverter in a less ventilated space. This is to ensure that the air does not stagnate and the unit can cool properly. Besides, if an inverter features a fan, take some time to come up with its placement idea since the airflow never has to be blocked.
How to install a power inverter
Now, I propose to clarify how to connect the inverter to the battery of your car. Inverter connection requires some patience and attentiveness, so do your best to follow every step correctly.
First, once you’ve decided on a place for it, place it there. Please note that inverters’ successful operation requires flat surfaces such as the floor of the car, the bottom of the trunk, and so on. It is also worth keeping a distance and leaving some space for ventilation.
Then, you need to connect the fuse. It will protect you from short circuits and overvoltages. From them, you can get a huge number of troubles, including fire. Fuses are often included and already installed.
The next step will be connecting the positive (+) red-marked connector to the positive terminal on the inverter’s body. In the same way, connect the black cable to the negative terminal.
Now, connect the black wires to the negative terminal of the battery and then, route both red and black cables to the battery. Worth noting that connecting the red cable has to be done later.
Now, it’s the turn of the ground. Route the grounding cable to any bare piece of metal on the car body and attach the other end to it. It is always best to double-check that you have connected everything correctly several times. Check all connections and note that they should fit snugly and touch each other. Loose connections can easily destroy the entire structure and only ruin your equipment.
Finally, we came to the very last step. At this point, you will be connecting the suspended end of the red wire to the positive (+) terminal on the battery. After the previous step, turn on the inverter and figure out whether it works as intended if you have completed the entire task correctly. If everything worked and it started, you did everything right!
